TANGO KEY PROGRAMMER WITH BASIC SOFTWARE
After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly, even on new FIAT CODE 2 system, also used in PSA Group vehicles! Only you have to write the new file back into the immobilizer system!
List of supported transponders:
PCF7930-31 writing, reading
PCF7935 writing, reading, shadow memory, crypto calculator
PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings
PCF7941 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7942 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7943 transponder, remote, Manchester & Biphase encodings
PCF7944 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7946 transponder, remote, Manchester & Biphase encodings
PCF7947 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7952 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7961 transponder, remote, Manchester & Biphase encodings
*Auto switching between PCF7936-PCF7961 windows if invalid type detected.
*Autodetect manchester / biphase
Temic 11 reading , writing to T5
Temic 12 reading , writing to T5
Megamos (13) reading , writing to T5 , emulating on PCF7930-35
Megamos (48) reading, writing, PIN, unlock by PIN, full range of memory contents, crypto calculation
Megamos CRYPTO-2 (8E) read ID, read/write EEPROM, write Cryptokey
Tiris (4C) reading
Tiris (4D) DST crypto reading, writing, crypto calculator
Tiris (4E) DST crypto reading, writing, crypto calculator
Tiris (8C) reading
TK5551M (T5 replacement)
SAAB reading , writing to T5
The product is in working out stages, therefore the list of the supported transponders will be developed later.
Free key makers:
• for ALFA ROMEO
- 145 (1995-2001)
- 156 (1998-2001)
- 166 (1998-2003)
• for AUDI
- Immobox 4A0 953 234
- Immobox 4B0953234 (ID48)
- A2 VDO 1999-2001 93C86, ID48
- A3 VDO 1999-2001 93C86, ID48
- A3 Magneti Marelli ID48
- A4 VDO 1999-2001 93C86, ID48
- A4 Magneti Marelli 1998-2001 ID48
- A6 VDO 1997-1998 93C66, ID13
- A6 VDO 1998-2001 93C66, ID48
- A6 VDO 1998-2001 93C86, ID48
- A6 Magneti Marelli 1998-2001 ID48
- A8 VDO 1999-2001 24C17, ID48
- TT Magneti Marelli ID48
• for BMW
All key makers for EWS allow to restore data in a damaged key.
Accessible from any EWS key maker: click Explore Key and follow instructions.
EWS Key Viewer. Allows to view the data of any for BMW EWS key.
No dump needed. The vewer displays the key No., odometer counter, VIN, transponder type, EWS model.
Unlike the analogous makers who have been built in Gambit, the new makers support models EWS for the Arabian countries, all makers allow to disable activated function Lock (disabled key). Besides the maker for EWS4 has possibility to work with ten keys while the Gambit supports only four first keys.
• for CITROEN
- Berlingo 1998
- Xsara 1998-2001
• for CHRYSLER
- 300C 2005-2007
- 300C 2008…
- Super Nova
- Ram 2002-2005
- Matiz 1998
- Cuore (ID4C)
- Move (ID4C)
- Sirion 1998
- Storia (ID4C)
- Terior (ID4C)
• for FIAT
- Barchetta eeprom
- Brava HC05 ID11
- Brava eeprom ID11
- Brava HC908 ID11
- Bravo eeprom based
- Bravo Siemens ID11
- Bravo Delphi ID11
- Bravo Magneti Marelli ID11
- Ducato 1996
- Marengo eeprom
- Marea eeprom
- Marea HC05 ID11
- Marea HC908 ID11
- Panda eeprom
- Seicento ID11
- Temra eeprom
• for FORD
- Cougar 1999
- Escape 2005
- Escort 1995
- Expedition 2001
- Explorer LTD 2007…
- Focus 1998…2005
- Galaxy immobox 1995…1998
- Ka 1996-2001
- Mondeo 1995
- Mondeo 2001
- Explorer 1998 Motorola-based
- Explorer 1998 TMS-based
- Taurus 2000…2003
- Transit 1995-98
- Transit 2000…
- Transit 2003…
• for HONDA
- Accord 1999…
- Civic 1995
- Civic 2001
- Civic 2006
• for HYUNDAI
- Atos 1996-99
- Accent 1996-99
- Lantra 93C56
- Lantra 93C66
- Daily 1996
• for JAGUAR
- Gr. Cherokee 1999- ,24C02 ID4E
- Gr. Cherokee 1999- ,for Motorola ID4E
• for KIA
- Rio 2001-2005
- Sportage 2001 (ID60)
• for LANCIA
- Dedra HC05 ID11
- Delta HC908 ID11
- Delta eeprom
- Y HC05 ID11
- Y HC908 ID11
- Town Car 1998
- TGA trucks
- GT HC05
- GT HC908
Key maker usage.
Key maker usage consists of a four steps. The 4-th step is additional and depends on a vehicle model.
1. Open an immobilizer dump file.
2. Choose number of the key you want create.
3. Place a transponder into the coil and click the WRITE button.
4. In some cases the program asks you to save a modified immobilizer dump. This dump must to be written into the immobilizer
First of all, take a look at this picture. The "Loaded File" window displays the immobilizer file name. Ensure that a valid dump is stored. The "Maker" window displays selected maker name. Ensure the right key maker selected.
The "info" windows display an important information:
1. Original transponder---Informs you about type of the original transponder
2. Allowed transponder---Informs you what type of transponders is suitable for the key maker
3. Data location---The immobilizer memory may be stored in various chips, the description informs you about from where you have to read a dump. Some immobilizers can have various chipsets. In this case the field displays several possible chips. Find one of them inside of the immobilizer and read it.
4. Data size---Each chip has certain memory size, the key maker accepts files with the described size.
5. Data format---This field appears in case of 93CXX eeprom seria.
There are two standards of data layout:
Intel format and Motorola format or Little Endian and Big Endian respectively.
The data layout depends on a chip-programmer that is used for eeprom reading.This field informs you what kind of format is suitable for the key maker.Usually you can see that both formats are suitable. It means that the program can understand any data layout.
Create a key step by step
Firstly, run the key maker interface according to the vehicle and read information in the "Info" window. Watch theData location field describes the memory chip. Find out the chip inside of the immobilizer and read it. Save the read data (dump).
Click the "OPEN IMMOBILIZER FILE" button and load the saved dump.
The program will analyse the dump.
If the dump is correct the "WRITE" button will become active and the "Keys" window will display the range of key numbers that can be created.
Take a look at the "Info" window, the Allowed transponder field.
Ensure you use a transponder exactly the indicated type.
Place the transponder into the coil.
Choose the key position you want create in the "Keys" window.
Click the "WRITE" button.
This starts the writing process and transponder will be stored with the appropriate data.
At this point you may be asked to save a new immobilizer dump.
The program displays a standard File Save dialog where you have to save the data.
After this you will be informed about the new data saved and must be written into the immobiliser
Write the new dump into the immobilizer. Now it is ready to operate with the created transponder.
If you are not asked to save a new file, it means that immobilizer is ready to operate with the created transponder without file replacing.
1. List of software
2. " WWW.MK3.COM " PROGRAMMING TOYOTA AND LEXUS SMART KEY VIA TANGO EMULATOR (video)